Home Feature list Profiles Download Register Pricing
 

Hardware Specifications

General: 

Type:
3.3V / 5V 3/4 length PCI Card
Analog Video Connectors:
(3) 15 pin high density
(adapter cables with bnc connectors included)
Analog Audio Connectors:
(1) 15 pin high density
Digital Video/Audio Connector:
90 pin digital video/audio bus
Interface:
PCI bus mastering
Firmware:
Field Upgradable
Supported Video I/O Formats:
Composite, Component, S-Video (Y/C),
SDI, NTSC and PAL
Digital Format:
8 bit ITU-R BT.601
Uncompressed Video:
Yes
Time Base Corrector:
Internal. External unit not required
Genlock:
Integrated; syncs either VT[4] or external house sync.
Vertical, horizontal and subcarrier phase controls
Comb Filter:
2-line luma and chroma comb filters including
adaptive luma comb for NTSC

Technical:
Video Channels:
1 input, 1 output (Analog), 3 input,
2 output (Digital Connector)
Audio Channels:
4 channels in adjustable mic or line level
4 channels out, line level

Video Levels (In/Out):
Composite:
1V p-p 75 Ohm

S-Video:
 
Luminance:
1V p-p 75 Ohm
Chroma:
286 mV p-p 75 Ohm

Compnent - Betacam:
 
Luminance:
714mV p-p 75 Ohm
R-Y, B-Y:
700 mV p-p 75 Ohm

Compnent - MII:
 
Luminance:
700mV p-p 75 Ohm
R-Y, B-Y:
486 mV p-p 75 Ohm

Video Performance:
Noise Level:
-58 dB
Luminance frequency
response (maximum variation
to 4.2 MHz - multi burst):
2 dB
Differential phase
(Modulated 40 IRE ramp):
1 degree
Differential gain
(Modulated 40 IRE ramp):
1.5 %
Chrominance frequency
response (3 dB point)
-CBWR=0/1 800/500 KHZ
K Factor (K-2T):
1 %
Luminance Non Linearity:
+/- 2 %
Minimum IRE passable
from input to output
(super black):
6.5 below black IRE
Maximum IRE passable
from input to output:
8 above white IRE

On Board Audio Performance*:
Frequency Response:
20HZ ­ 20KHZ +/- 1 dB
Harmonic Distortion
(THD+N):
< .05 %
Dynamic Range
Unweighted/A weighted:
>80 / >83 dB
Audio Sample Rate:
48 KHZ

Optional Hardware Specifications:



Video:

 

8 Component inputs, or 8 Y/C inputs, or 24 Composite inputs. (You may have inputs of differing formats on differing rows, so you can have all three formats feeding to the VT[4] at any time)
Proc Amp controls for each input
Multiple inputs internally synchronized; cameras do not require genlock capability
4 Component or Y/C program outputs
4 Composite program outputs
Preview output (can also display Alpha)
Audio In:
4 XLR balanced inputs
(mic or line level, switchable phantom power)
4 XLR balanced outputs
12 RCA unbalanced inputs (6 stereo pairs)
2 Auxiliary Return inputs
Audio Out:
4 XLR balanced outputs
8 Unbalanced RCA outputs
2 Auxiliary Send outputs
1 PA Mix
Machine Control:
3 RS-422 deck controls for digitizing and batch re-capture



High quality, hermetically-sealed magnetic-reed switches
High quality, Panasonic rotary encoders
Speed control
Effects selection
CG page selection
8-bit stepping for 256 discrete transition levels on T-bar
USB 1.1 or 2.0 compatible device

3/4-length PCI card (requires free PCI slot)
1 SMPTE 259M Serial Digital Video in
1 SMPTE 259M Serial Digital Video out
1 SMPTE 259M Serial Digital Preview or Alpha Channel out
1 AES/EBU Serial Digital Audio in
1 AES/EBU Serial Digital Audio out

 

 

System requirements

 

SX-84
RS-8
SDI

 

© 2005 Teletutto

 
Home Feature list Profiles Download Register Pricing